background image

211221

Page 6 / 7

Mounting Screw X2

#8/32X1/2 in

Fixture Mounting Screw

Mounting Strap 

Mounting Screw X2

#6/32 X1/2 in

Mounting Screw X2

#10/24 X1/4 in

Decorative cover

Assembly Kit

6464MM (1 SET) 

The following parts are available for re-order if damaged or missing. Call our toll free at 1-800-887-6326.

5-YEAR LIMITED WARRANTY:

All products are warranted to be free of defects in material and workmanship for five (5) years from date of purchase. 

This warranty is limited to the correction of any such defect, or the replacement of any such defective item(s), provided 

that: (a) we are properly notified and consent to return of the item(s) in question:(b) the item(s) is / are returned with proof 

of purchase date; and (c) it is found upon inspection by us that the item(s) is / are defective as noted above. This warranty

does not cover labor costs, consequential damages, nor does it apply to any item(s) that have been improperly installed, 

overloaded, altered, or otherwise abused by the customer, its agent(s) or employee(s). Finishes are specially excluded 

from the terms of this warranty since they are subject to environmental maintenance deemed beyond our control. Other 

than the described obligation, we assume no further liability with respect to the sale or use of our products.We make no 

warranty, express or implied, and disclaim any warranty of merchantability or fitness for a particular purpose.

---The light comes on for no apparent reason 

:

1. Re-aim the motion sensor.

2. Decrease the sensitivity setting.

3. Do not use a dimmer or timer to control the light fixture. Replace the dimmer or timer with a standard on/off wall
---The light flashes on and off:
1. Reposition the bulb away from the motion sensor.

2. Reposition the motion sensor.

3. The motion sensor is in “TEST” mode and warm up.

Troubleshooting

---The light does not come on at all:

1. Make sure the wall switch and circuit breaker are on.

2. Make sure the wiring is correct.

3. Cover the sensor with dark color cloth to verify that the ambient light level is not too high.

Summary of Contents for T0624








Reviews: