VBC Racing LIGHTNING 12M, Instruction Manual

BAG MARKED

STEP6

Front Suspension Assembly

07

© VBC Racing LIGHTNING12M

M2.5x4 Roundhead C-02-SC-R2504 x 4

Ball Connector 4.7x12mm A-02-VBC-5015 x 2

Lightning12 Front Axle B-02-VBC-5060 x 2

Pivot Ball B-02-VBC-5068 x 4

M3x15mm Turnbuckle, Black A-02-VBC-5053 x 2

Lightning12 Front Upper Arm Eyelet
A-02-VBC-5092 x 2

M3x10 Roundhead C-02-SC-R0310 x 4

M3x12 Flathead C-02-SC-F0312 x 4

Lightning12 Front Upper Arm Spacer, 1.5mm
A-01-VBC-5048 x 2

M3.3x0.4 Kingpin Shim C-02-VBC-5069 x 12

Lightning12 Kingpin C-02-VBC-5044 x 2

Front Spring (Medium/Gold) C-02-VBC-5042 x 2

6

M2.5x4 Roundhead

Ball Connector 4.7x12mm

Lightning12 Front Axle

Pivot Ball

Lightning12 Front Upper Arm Eyelet 

M3x15mm Turnbuckle, Black

Lightning12 Front Upper Arm

A-02-VBC-5051

Please note the direction of 

the Upper Arm Eyelet as they

are offset.

4mm

Pivot Ball

Lightning12 Steering Knuckle

D-05-VBC-0111

Lightning12 Front Lower Arm
A-02-VBC-5067

Lightning12 Front Upper 
Arm Spacer, 1.5mm

Lightning12 Aluminum Upper Arm Mount

B-02-VBC-5057

Lightning12 Aluminum

Front Bulkhead, Right

B-02-VBC-5066

M3x12 Flathead

M3x10 Roundhead

Make Two (Leff And Right Side)

M3.3x0.4 Kingpin Shim

M2x8 Caphead C-02-SC-R2.0x8 x 2

M2x8 Caphead

Lightning12 Kingpin

Front Spring
(Medium/Gold) 

M3.3x0.4 Kingpin Shim x 4

M3.3x0.4 Kingpin Shim

M2.5x4 Roundhead

10

5

0

Note : 10   Is The Standard Setup

Note : Lower arm in the same direction,
dot marking should be facing up

<< Front >>

<< Rear >>

Dot Marking

Dot Marking

Note : Tighten the screw slowly to
adjust the pivot ball movement

Upper Arm Mount Active Caster Setup

OPTIONAL FRONT SPRINGS :
Front Spring (Soft/Silver) C-02-VBC-5041
Front Spring (Hard/Black) C-02-VBC-5043

OPTIONAL FRONT UPPER ARM SPACER SET :
0.5mm/1.0mm Adjust Spacer
(D-05-VBC-0109)