BAG MARKED
STEP27-28
27
Assemble Oil Shocks
22
© VBC Racing WILDFIRE D06
TBB Shock Body B-02-VBC-0120 x 4
TBB Shock Height Adjuster B-02-VBC-0121 x 4
TBB Shock Bottom Cap A-03-VBC-0122 x 4
TBB Shock Piston (3 holes) A-03-VBC-0123 x 4
TBB Shock Bottom Connector A-03-VBC-0124 x 4
TBB Shaft Cap B-03-VBC-0125 x 4
TBB Shaft Guide A-03-VBC-0126 x 4
TBB Shock Shaft B-03-VBC-0127 x 4
Sealer O-Ring (Shock Height Adjuster)
B-03-VBC-0128 x 4
Shaft Sealer O-Ring B-03-VBC-0012 x 4
M2 E-Clip B-02-VBC-0129 x 8
Insert Sealer O-Ring inside the Shock Height Adjuster groove
Make sure the shock shaft can move up and down freely
MAKE 4 SHOCKS
Wipe small amount of shock oil to the thread
Note the double ring face to ball connector
TBB Shock Body
TBB Shock Height Adjuster
TBB Shock Bottom Cap
TBB Shock Piston (3 holes)
TBB Shock Bottom Connector
TBB Shaft Cap
Shaft Sealer O-Ring
TBB Shaft Guide
TBB Shock Shaft
M2 E-Clip
M2 E-Clip
Sealer O-Ring
TBB Shock Height Adjuster
Note TBB Shock Piston Groove Is
Facing Downwards
Note The Direction Of Slot On Bottom
TBB Shaft Guide
TBB Shock Piston
