23
Switching the Power ON/OFF
The power button is located on the button pad on
the left handlebar. To switch ON, press the power
button until the display comes ON. To switch
OFF, press and hold the power button until the
display comes OFF.
Power Assist Level
choose a level of pedal assist by using the “+” and “-” button on the button pad. By selecting level
zero, you will provide no assistance. Pedal assist level 1 is the lowest level of pedal assist and pedal
assist level 5 is the highest level of pedal assist.
Throttle (Accelerator)
The Right handlebar presents a twist throttle. Whenever you want to operate the throttle, make sure the
pedal assist level is set above “0”. Based on how much speed and acceleration you want to reach, you
need to twist the throttle gradually. The more you twist the throttle from its resting position, the more
power push your ebike forward. If you wish to switch OFF the throttle, select power assist level “0”.
When you stop the ebike completely, you have to turn the display OFF. So, whenever the rider is ready
to go, the display will be turned back ON and the motor will be activated."
Switching ON/OFF the Headlight and Rearlight
In order to turn ON lights, you need to have your battery inside your ebike. Otherwise the lights will not
work.
Press the Headlight key to turn ON the headlight and taillight.
Press the Headlight key again to switch OFF the lights.
The vBike electric bikes come with high quality, LED wide angle headlight and integrated rear lights with
brake light. Please Turn ON the lights when riding specially at night or in low visibility situations.
www.vbike.ca
vBike Canada
Using the twist throttle needs practice with extreme caution. If you are at a complete
stop with the ebike turned ON, never twist the throttle and it is a good idea to have
your assist level in Zero status. By twisting the throttle unknowingly, the ebike could
throw the rider off balance and cause serious harm, injury or death.
Attention
LEVO 20
LEVO 20s
Switching the Power ON/OFF
The power button is located on the button pad on
the left handlebar. To switch ON, press and hold
the power button until the display comes ON. To
switch OFF, press and hold the power button until
the display comes OFF.
