Steam Wand
Steam Valve
Steam Gauge
Heating Element
Activity Lamp
Pressure
Adjustment screw
Low Level Indicator
Temperature
Adjustment screw
Power Activity Lamp
Brew Gauge
Hot Water Valve
Grouphead
Hot Water Wand
Drip Tray Cover
Drip Tray
PARTS IDENTIFICATION
ACCESSORIES
QUICK START GUIDE
To get the most out of your Vibiemme Domobar Super espresso machine and for your own personal
safety it is highly recommended that you take the time to read this manual in its entirety.
CAUTION:
This quick start guide is meant for those more familiar with the operation of an espresso
machine with a heat exchanger. If this is your first espresso machine, or if it is your first machine with a
heat exchanger system, we recommend reading the manual thoroughly before beginning. Damage done
to the machine due to improper operation is not covered by the warranty.
1
Unpack machine
(
1
)
Remove machine from packaging carton
Turn power switch to position 0FF
Close hot water valve and steam (do NOT fully tighten!)
Remove and save packing and shipping materials
Remove water reservoir and wash thoroughly and reinstall
2
Connect machine (
3
)
3
Fill reservoir with proper quality water (
3
)
4
Insert portafilter (
4
)
5
Turn power switch to Position ON and wait for pump to start (
4.1
)
6
When pump stops, stand by machine and monitor warm up (
4.2
)
7
Grind Coffee, fill and tamp coffee in portafilter to prepare it for espresso pull
8
Set pressure (
7
)
9
Pull espresso shot
10
Steam milk if desired
11
Clean up when done (
9
)
The numbers in parenthesis following the steps above indicate the chapter where you will find more
detailed information on these procedures.
Manual Control Lever
Power Switch
Tamper
Blind Filter
Portafilter
Gruphead
Brush
Summary of Contents for Domobar Junior HX
Page 1: ......
