XTi- VBox Android TV Gateway User
Manual
5
. Setting up XTi-VBox TV Gateway using the Web Interface
5.1
. Step 1 – System Setup
10
5.1
Step 1 – System Setup
Step 1- System Setup
requires that you first select your configuration (Figure 6).
Figure 6: Quick Setup Wizard – Step 1 – System Setup: Device Configuration page
1.
Configure your system settings as explained in Table 2.
Table 2: Quick Setup Wizard – Step 1 – System Setup: System Settings page
Option
Description
Interface Language
Select the language of this Web interface from the list.
Device Name
Set name your device.
The name of your XTi-VBox TV Gateway device.
This name appears on devices that are connected to your network and
have the UPnP Protocol enabled, Use the default name or override it by
entering a new name.
Country
Choose your country
Auto Scan
In this selection the system will go through all frequencies and scan
them
