6.
Insert the SD card
- you’re now ready to drive. The
unit is set to ‘record only when moving’. Once
satellite lock has been obtained, the unit will start
recording every time the vehicle speed goes above
5km/h and stop when the speed has been 0km/h for
5 seconds.
This setting can be overridden by pressing the
RECORD
button to toggle logging on and off.
7.
The
REC
LED will illuminate when recording
.
When the vehicle comes to a stop, it will flash as
the file is closed.
5.
Position the vehicle so it has a
clear view of the
sky
. It will take up to
two minutes to acquire a
satellite lock
, at which point the
GPS
LED will
illuminate.
If your unit is having
trouble gaining satellite lock
when in an open area, press and hold the
RECORD
button for 10 seconds, this will perform a GPS ‘cold
start’.
www.vboxmotorsport.co.uk
NEVER eject the SD card if the RECORD LED is
showing as this can corrupt video.
To stop recording,
either come to a halt, press the
RECORD
button or
disconnect the power (the internal ‘tank circuit’ will
stop the recording and safely close the file).