manualshive.com logo in svg

VBOX II, Manual

Introducing the Motorola II, a cutting-edge device designed for seamless connectivity. Navigate its features effortlessly with our comprehensive Operating Instructions Manual, available for free download at 88.208.23.73:8080. This manual provides essential insights, ensuring a smooth user experience and unlocking the full potential of your Motorola II.

Share
Download
background image

01 - VBOX II Front Panel

https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_II/
Discontinued_VBOX_II_versions/User_Guide_VBOX_II_(VB2SX5%2C_VB2SX10%2C_VB20SL3)/01_-
_VBOX_II_Front_Panel

VBOX II units can be configured using the front panel buttons, which enables configuration without the need for a
computer. Configuration can also be made via the

VBOX Setup Software

.

From the main screen, press the’■’ button to enter the configuration screen.

Note: Entering the configuration screen will cause the VBOX to stop logging to the SD card. When in
continuous logging mode, please ensure that the ’■' button is pushed prior to removing the SD card to avoid
data loss.

Once in the configuration screen, press the ‘◄’and ‘►’ buttons to highlight the next or previous choice in any menu, and
press ’■’ to select the highlighted option. Most Main menus contain sub-menus, for example the Settings and Setup
Antennas menus contain separate menus for each parameter.

1

Summary of Contents for II












Reviews:

No comments

Related manuals for II

Samson 3248-1 Mounting And Operating Instructions preview
3248-1
Brand: Samson Pages: 16
ABB TZIDC Quick Start preview
TZIDC
Brand: ABB Pages: 2
ABB TZIDC-200 Operating Instructions Manual preview
TZIDC-200
Brand: ABB Pages: 68
Bürkert 8696 Operating Instructions Manual preview
8696
Brand: Bürkert Pages: 75

Brands by name

Popular brands

Load more brands