Setup Antennas (Pitch Antenna)
SEPARATION
Press ’■’ and then use the ‘◄’ and ‘►’ buttons to change the antenna separation. Then press ’■’
to confirm.
Range is 0.5 – 5.0 m in 0.1 m increments
LEVEL
Press’■’ and then use the ‘◄’ and ‘►’ buttons to enable or disable the LEVEL option. With the
LEVEL set to YES the RTK lock is more resilient.
But maximum ROLL or PITCH in this mode should be 10 degrees.
SWAP
ANTENNAS
Set to ‘ON’ to allow the primary Antenna A to be mounted ahead of the Secondary Antenna B.
Default is ‘OFF’. Then press ’■’ to confirm.
SLIP OFFSET
Press ’■’ to enter the Slip offset sub menu. Within this sub menu the Slip offset can be calculated
and applied or cleared.
PITCH
OFFSET
Press ’■’ to enter the Pitch offset sub menu. Within this sub menu a Pitch offset can be calculated
and applied or cleared.
BACK
Press ’■’ to go back to the Main menu.
5
