Setting up with a PC - Windows
1. From a computer connected to the same router open
Network folder
2. Find the VBox device and press the mouse's right click
button over it to open the WEB page
3. As your device was not configured, the Quick Setup
Wizard page will open (jump to Step 1)
Setting up with a Mac or any other device
1. Find the VBox's IP address, you can see the VBox IP
address from any VBox app or by accessing your router
2. From any WEB browser type the VBox IP address
3. As your device was not configured, the Quick Setup
Wizard page will open (jump to Step 1)
Step 1 - System Configuration
Interface Language
- Set the VBox management pages
language
TV Source
- Set your TV source DVB-T/T2 for Antenna
reception or DVB-C for Cable TV reception
System Name
- Name you TV Gateway
Country
- Select your country to automatically set the
appropriate country's settings
Auto Tune
- Press the Auto tune to automatically scan
for available channels in your area
Manual Tune
- Manually select the frequencies to scan
