Simplified Illustration of Operation of System Controller VC-SC1000M
- 6 -
Inquiry Protocol of the Current Camera
Under the state of non-setting, press SET + CAM to display ID, control protocol and baud rate of external communication of the current camera.
Press any key to exit.
Other
There are three indicators (red, yellow, green) on the controller.
The red indicates the power, the yellow indicates receiving signal, the green indicates emitting signal.
The red will light when power is on, others will be glittering when the signal is received or emitted.
The movement up, down, left, right of the joystick can control the relevant action of the cameras. Rotate the joystick to control the zoom of lens.
Current Camera: 0001
Cam Protocol: Pelco-D
Current Baud Rate: 9600
Set DVR ID:01 <00-66>
MATRIX INPUT Cam NO.0001
DVR IN:01 SYS CAM:0001
Save Off.Exit
Press NEXT for one
time
HIK DVR ID:01
22:26:35 04-08-2005 Fri.
Set DVR ID:01 <00-66>
Save Off.Exit
Press NEXT for one time
by one who has
administrative authority.
Input channel No. from
DVR to the matrix
Input channel No.of DVR responds to camera No.
Input channel No.
ID of DVR
Off.Exit
Off.Exit
