GB
C
08
10
WS in mm / inch
1x
Programming (setting up) your wheelsize
Step 1: Call TRP information in your display.
Step 2: Press MODE 1 button for 5 sec.
"WS" is displayed along with an alternating flashing symbol for KMH and MPH.
Step 3: By pressing the MODE 2 button you can choose whether you want MPH or KMH readout on your display.
Step 4: Once you have chosen your measuring unit, continue by pressing the MODE 1 button briefly (0.1 sec). Now, either the default
value or the wheelsize value previously entered (WS) is displayed with the last number flashing.
Step 5: With buttons MODE 1 and MODE 2 you can enter the wheelsize previously determined. (see set-up mode).
Step 6: Once you have entered the last number for wheelsize, the computer automatically goes back to normal mode. You may also
exit the set-up mode at any time by pressing the MODE 1 button.
Watch out:
When you exit set-up without having completed entering your data, the computer may well work with faulty values leading
to misinformation in your display.
