110
©
Continental Automotive
Issue 10/2019
Code/Meaning
Cause
Effect
How to proceed
17
Workshop temporarily
blocked
Attempt to
manipulate the
data of the
BVDR
or error of
access code or
workshop
password.
This message
appears when
more than 3
attempts to enter
the workshop code
have been
unsuccessful.
This procedure should
be performed only by
an authorized VDO
station.
18
Printer Overheated
Printer overheated
due to several
consecutive prints.
The BVDR cancels
the print job when
it detects the high
temperature.
Wait a few minutes for
the printer to cool, and
try to print again. If the
error persists, go to an
authorized VDO
station.
4. Periodic inspection
Periodic inspections of tachograph must be performed in accordance with local
regulations.
Inspection rules are different for every country, however it is obligation of the
driver or vehicle owner to ensure that regular inspections are made respecting
the local law of the country where the vehicle is applied.
For more information on this inspection, see current legislation in your country.
