Issue 10/2019
©
Continental Automotive
79
Handling BVDR digital tachograph
Attention!
Be careful when opening and closing the printer compartment.
This compartment is used only for the use of VDO roll. Always
keep the printer compartment closed.
Attention!
Some messages in the BVDR digital tachograph display or
audible warnings may occur while the vehicle is in motion. Do
not divert your attention because of these warnings. Please
wait for a safe opportunity to check them.
Follow the general comments to avoid damaging the BVDR digital tachograph
and the user:
•
Only an authorized VDO workshop is able to perform installations and
repairs on your BVDR digital tachograph.
•
Only use thermal papers of the VDO brand, which are tested, approved and
ensure the proper functioning of the printer. The use of unsuitable paper can
cause damage to the BVDR digital tachograph.
•
Do not use sharp objects or cutting objects in buttons, such as pens,
styluses, pliers, screwdrivers, etc.
•
In cleaning the BVDR digital tachograph, do not use water jets or abrasive
cleaners or solvents such as thinner or petroleum products. When dirty, it is
recommended to use a soft cloth and isopropyl alcohol.