94
©
Continental Automotive
Issue 10/2019
2.4.5.2
Driver logout via USB
Insert into the front USB port of the BVDR, the same VDO
pendrive
used for
login, after verification, the identification will be immediate and the screen
displayed will be as shown below. If yes, press
. If the answer is no, press
.
2.4.6 Print function
This function allows the user to print a tape with the information of the last 24
hours of the vehicle or, for the Chile pattern, information of the last 5 minutes.
To print the tape, go to the print menu and press
. The print screen will show
the last 24 hours (a), or the last 5 minutes (b), according to the configuration of
the equipment. To start printing, press the
button again.
a.
b.
Attention
To ensure smooth operation of the printing device, it is
important not to have an ignition event during this procedure.
In the data report print cases the last 24 hours in ribbon
diagram (standard application) should be made only on pre-
printed paper VDO and in the case of printing the last 5 min
(application Chile) should be made on paper white VDO,
ensuring the correct printer operation.
