40
©
Continental Automotive
Issue 02/2017
2.4.14.2 Operation information in diagram tape
The vehicle's operation information, printed on the diagram tape is according to
Fig 2.5.2.2.1
Figure 2.5.2.2.1
a.
Peak speed in minutes: It will be represented the highest speed reached in
minutes on the diagram tape. The second-to-second information can only
be viewed with the memory data download function. The represented top
speed is 150km / h.
b.
Distance traveled according to the time printed on the diagram tape
(numerical).
c.
Distance traveled according to the time printed on the diagram tape
(graphical - every rise and fall of the curve 10km were driven).
d.
Print time: last 24 hours of vehicle operation.
e.
Power Failure: If a continuous line is viewed in this area means that the
vehicle has turned off the main battery of the vehicle. In some situations
handling, the driver can be fined.
f.
Driver identification in accordance with the printed time: Indicates that the
driver was identified according to the printed time. When the speed is
continuously in line zero, it means the time that the driver was not active (at
rest).
a.
d.
e.
Summary of Contents for BVDR
Page 1: ...Digital BVDR Tachograph Operator s Instruction manual...
Page 54: ......
