14
Storing automatically a station
You can automatically memorise the 10 most
powerful stations on FM and MW bands.
1- Short press ENTER.
2- Select BAND with the
keys.
3- With the keys, select an FM or MW band
exclusively.
4- Use the
keys to select START AST.
5- Press ENTER to memorize the station.
Note :
This function works only with selected
FM bands (FM 123, FM memo, FM AST) or MW
bands (MW 123, MW AST): you cannot store
stations from LW bands.
Starting RDS Stations Memo
This function allows you to memorize up to 50
RDS stations from the FM band and to display
them in alphabetical order.
1- Short press ENTER.
2- Select BAND with the
keys.
3- With the keys, select FM memo.
4- Use
keys to select START MEMO.
5- Press ENTER to memorize the stations and
display them in alphabetical order.
Note :
This function only works with the
selected band FM memo.
Searching a Program Type
It is possible to search for FM stations using
the PTY code (Programme TYpe).
This one gives you direct access to preselected
types of program (e.g. News, Affairs, etc).
1- Short press ENTER.
2- Select PTY SEARCH with the
keys.
3- Use the keys to select the program type
required.
4- Press ENTER to launch the search. At the
end, you will hear a beep followed by the
first stations found.
Note :
PTY not yet operational in all countries.
Searching the best reception
When the AF function is activated, the set will
remain tuned to the current station but will
continue to search for the best received
frequency. Deactivate this function only if you
hear short interruptions.
1- Short press ENTER.
2- Select AF with the
keys.
3- Use the keys, to set ON (default value) or
OFF.
4- Press ESC to enter the value.
Scanning Stations or Presets
This function allows you to scan the stations or
the presets (see Tuner Init menu: Selecting the
scanning type) of the current band.
1- Short press ENTER.
2- Select SCAN with the
keys.
3- Press ENTER to launch the scan: a messa-
ge displays the stations.
Setting the Tuning Mode
This function lets you define the tuning mode
for searching a station.
1- Short press ENTER.
2- Select TUNING with the
keys.
3- Use the keys to select MANUAL or AUTO
(automatic: default value).
4- Press ESC to enter the value.
Note :
After one minute, the function auto-
matically returns to AUTO mode.
Naming a Radio Station:
Use this function to name a radio station with
a maximum of 8 letters.
1- Short press ENTER
2- Select NAME with the
keys.
3- Press ENTER to display an alphanumeric list
as typewriter.
4- Scroll through the letters with the
keys
and use the keys to get to the upper-
case letters, lower case letters, the numbers
or the symbols.
5- Press ENTER to display the character and
repeat this operation for each character.
6- At the end of the word, select [
]
7- Press ENTER to confirm the name.
Note1:
This function is only available for a radio
station (without station-name) and is saved in
the memory (see Saving a station in memory).
If the memory is full, the NAME function is no
longer available.
Note 2:
To delete a character, select [
] at
the beginning of the alphanumeric list and press
ENTER.
AN2001-2L-Eng.pm7
11/20/02, 3:32 PM
14
