VDO CD 4203 -, User Manual

21

English

Starting the Auto-Equalizer*

Use this function to start the auto-equalizer
calibration (see Configuration).
1- Long press SOUND.
2- Select AUTO EQ with the 

 keys.

3- Press ENTER.

Note :

 When auto-equalization is active, you

can stop it by switching OFF the set.

Customizing the Sound
Reproduction*

Use this function to tune the front/rear speaker
to your own preference by setting the
amplitude of the five available frequency bands.
1- Short press SOUND.
2- Select EQ STYLE with the 

 keys.

3- Use the   keys to select one custom value:

Custom 1 to Custom 5.

4- Long press SOUND.
5- Select CUSTOMIZE with the 

 keys.

6- Use the    keys to select the speakers to

adjust: Front Speak or Rear Speak.

7- Press ENTER to validate your choice.
8- In the display, use:

- the 

 keys to select a frequency band:

80Hz, 200Hz, 500Hz, 2kHz or 8KHz.
- the   keys to adjust the amplitude level:
from -12dB to +12dB.

Note: 

If you want to copy one speaker setting

to another (Left to Right or Right to Left), use
the 

 keys to move the small cursor above

the copy arrow (Copy R-L or Copy L-R) then
press ENTER.

CAR COMPUTER

By either a short or long press on the
COMPUTER key, you get two different menus
to set the computer parameters (see cover
pages).

CAR COMPUTER MENU

1- Short press the COMPUTER key to get to

the CAR COMPUTER MENU.

2- Use the 

 keys to select an option.

3- Use the   keys to set the option value.
4- Press ESC to enter the value.

Displaying the time

Use this function to display the time.
1- Short press COMPUTER.
2- Select TIME with the 

 keys.

3- Use the   keys to display the total driven

time (TOT) or the trip time (TRIP).

4- Press ESC to enter the value.

Displaying the temperature

Use this function to display the temperature.
1- Short press COMPUTER.
2- Select TEMPERATURE with 

 keys: the set

displays the outside temperature.

3- Press ESC to quit.

Displaying the battery voltage

Use this function to display the current battery
voltage (accuracy: 0,1 V).
1- Short press COMPUTER.
2- Select BATTERY with the 

 keys: the set

displays the battery voltage.

3- Press ESC to quit.

Note : 

The battery indicates the voltage at the

car radio input, not at the engine level.

Displaying the clock

Use this function to display the hour and the
minutes of the clock.
1- Short press COMPUTER.
2- Select CLOCK with the 

  keys: the set

displays the current time.

3- Press ESC to quit.

* For CD4403 only

AN2001-2L-Eng.pm7

11/20/02, 3:32 PM

21