IMPORTANT INFORMATION
A
The system must only be installed by trained specialists.
A
Observe automotive industry quality standards.
A
Fire hazard! When drilling, care must be taken not to damage concealed wiring harnesses, the
fuel tank and fuel lines.
A
Never drill into supporting or safety-relevant body parts.
It is essential to observe the following when installing components in the passenger
compartment:
A
Ensure that the driver has a clear all-round view.
A
Increased risk of injury in the event of an accident. Do not install components in the inflation
range of the airbag or in areas where the head or knees may knock against them.
A
Only install in vehicles with 12V on-board voltage and negative earth. Risk of malfunction,
damage and vehicle fire if installed in unsuitable vehicles (e. g. heavy goods vehicles, buses).
A
Do not damage safety system wiring (airbag etc.). (Lines are normally specially marked, for
example by labels.)
A
Do not use test lamps to test the voltage, since excessively high currents can damage /
destroy electronic components.
A
Fit toothed washers at earth connections to the vehicle body. If necessary, remove paint and
dirt beforehand. Subsequently, protect bare metal against corrosion.
A
In order to ensure perfect installation, use only the original components supplied. The use of
non-authorised components may result in malfunction.
A
Do not install the unit in positions where it is exposed to high temperatures, dust, dirt or
excessive vibration (e.g. due to direct sunlight or heating vents).
Scope of delivery, Fig. 1
1
CIX 3000 Blue Bluetooth hands-free terminal
2
4 self-tapping screws 4.2 x 16 mm
3
Vehicle network cable
4
Installation and operating instructions
5
Loudspeaker
6
Microphone
7
Infrared receiver
8
Infrared remote control
9
2 connecting plates
0
2 insulation piercing connectors/clamping connectors
INSTALLATION INSTRUCTIONS
5
English
