4. CIX 3000 Blue and 1-DIN navigation radios, Fig. 4d
☞
Use the optional CA 3021 accessory cable to connect the CIX 3000 Blue to the RCA/Cinch
socket (“Tel In”) on the VDO Dayton navigation radio.
☞
Connect the other CA 3021 cable as shown in the instructions supplied.
☞
Make the appropriate settings in the “INITIALISATION” menu on the navigation radio.
☞
Turn the volume down on the CIX 3000 to prevent override on the audio system.
A
Always observe the information in the instructions supplied with the adapter cables and, if
necessary, visit our website (details under “Service”).
Initial operation and system check
1. Reconnect the battery.
2. Restore perfect functioning of the electrical system (clock, trip computer, alarm system,
airbag, immobiliser, radio coding etc.).
3. Switch on the ACC/accessory contact on the ignition lock.
4. Press any button on the remote control.
If you hear one or a number of tones, the CIX 3000 Blue is connected correctly.
5. Activate Bluetooth on the mobile phone. Establish the Bluetooth link with the mobile
phone as described in the operating instructions, see page 12.
6. Make a test call and check that the CIX 3000 Blue hands-free terminal and the remote
control are operating correctly.
Notes for confirmation tones
If audio playback is via an audio system, no confirmation tones will be output via the audio
system when buttons are pressed on the remote control. However, confirmation tones will
be output if the basic settings are applied (e.g. when an attempt is made to establish a link
or if the system is reset).
Checking the vehicle functions
A
Check the safety-relevant vehicle functions only when the vehicle is stationary, or moving at
low speed. Only perform the check in an open area.
Brake system, alarm system, lighting system, immobiliser, speedometer, on-board computer,
radio (coding) and hi-fi system, clock.
Service
For up-to-date information and a compatibility list of the mobile phones supported, visit our
website:
www.vdodayton.com
or contact a VDO Dayton dealer.
Subject to technical modifications and errors.
INSTALLATION INSTRUCTIONS
9
English
