DLKPro Download Key • Operating Instructions – Edition 03/2012
4 Downloading data
4 Downloading data
With the DLKPro you can download the following data:
• the complete contents of the mass memory (data from at least 365 days),
• mass memory data covering a specified period and including specific data blocks,
• the contents of a driver card inserted in the digital tachograph (driver data from at least 28 days),
• the contents of a driver card inserted in the chip card reader (driver data from at least 28 days).
Note
:
• Before downloading data from a digital tachograph,
you must read and strictly observe the General
Information on page 3.
• Downloading data from digital tachographs is only
possible if a company card, control card or
workshop card is inserted in card slot 2 for instance.
• The exception to this rule is the driver card
download:
You can download driver card data from the
DTCO 1381 Rel. 1.4 or a later release without
inserting one of these cards.
• Activate the integrated chip card reader with the
licence card if you want to use it for card
downloading; see page 10.
Note
: Please remember that the provisions for
identifying download files in France and Spain differ
from those in other European countries.
Check the DLKPro’s configuration before using the
DLKPro for data downloading.
