38
DTCO 1381
Withdrawing driver card(s)
4. Operational mode
4
쮿
Withdrawing driver card(s)
Driver card request
1.
Turn on the vehicle’s ignition.
(Required only for ADR variant *.)
2.
Enter the corresponding activity; for
example, at the end of the work shift
to "
".
3.
Press the ejection button
for card
slot 1 or card slot 2. The subsequent
procedure is menu-guided,
As soon as you close the printer drawer,
the ejection will be started.
Card withdrawal during manual entry
1.
Press the corresponding ejection but-
ton .
2.
Select and acknowledge the following
queries with "
No
".
3.
Continue,
The manual entry is aborted, the
DTCO 1381 saves the activity "
?
" for the
unknown period.
In principle, the driver card can
remain in the card slot at the end of
the work shift – please enter the
activity "
".
However, when the driver or
vehicle is changed, the driver card
should generally be withdrawn from
the card slot.
Refer to “Driver / vehicle change
You can withdraw the driver card
from the card slot only when the
vehicle is not moving!
The ejection from card slot 2 is
blocked if the printer drawer is open!
This will be indicated by the
following operational note.
drawer
open
xx
1M confirm
entry?
no
1M entry
addition?
no
Service
only
Summary of Contents for DTCO 1381
