r
OK
. . . . . . . . . . . . In menus: Confirm a menu selection
In the channel select list: Display the list of channels
t
Exit
. . . . . . . . . . . Back to preceding menu
Cancelling a function
z
SWAP
. . . . . . . . . Switch back and forth between the current channel and the one
previously selected
u
PRF+
/
PRF-
. . . . . Select next/previous list of favourites/list of channels
i
Pause
. . . . . . . . . Activate/deactivate freeze frame
o
EPG
. . . . . . . . . . . Turn Electronic Programme Guide on or off
p
Text
. . . . . . . . . . . Turn teletext on or off
a
Subtitle
. . . . . . . Select sub-titles language (if subtitles are being transmitted)
On/off - stand-by
The DTV 6500 is switched on and off together with the ignition.
You can switch the DTV 6500 into stand-by mode or turn it back on again using the
remote control:
☞
Press the
Power
button to switch the DVB-T tuner into or out of stand-by mode.
✎
You can also turn on the tuner by pressing the number keys.
Source selection - TV/AV
■
Switching between TV reception and an external AV source
☞
Press the
TV/AV
button to switch from TV reception to any AV device connected to
the tuner.
☞
Press the
TV/AV
button again to switch back to TV reception.
Channel selection
■
Channel selection up/down
☞
Press the
CH+
- or
CH-
buttons to move one place up or down in the channel list.
✎
Programme selection can also be accomplished using keys
8
and
2
on the remote
control.
■
Direct input via number keys
☞
Enter the desired channel number using the number keys.
✎
When entering channel numbers of 10 and above, you have about 1 second after
pressing one number key to complete the entry.
■
To switch back to the last channel - SWAP
☞
Press the
SWAP
button to switch back to the last channel selected.
☞
Press the
SWAP
button again to go back to the programme you were watching
before.
Operation
13
English
