OPERATION
16
Selecting call numbers from call registers
Call numbers can also be selected or dialled directly from the following call registers:
• "Missed calls" *
• "Incoming calls" *
• "Outgoing calls"
* depending on the network operator. The function for caller identification must be sup-
ported.
1
The number of entries stored in the list depends on the memory capacity of the SIM
card. If the memory is full, the respective oldest entry is deleted.
To select a call number from the call lists:
1. Call up the main menu.
2. Select the "Call register" option in the main menu.
The "Call register" menu is shown.
3. Select the relevant register.
With the
2
and
8
cursor buttons it is now possible to search for entries.
4. When the desired call number is displayed, press the
OK
button.
The call number is now displayed in the first screen line, with the cursor (grey) immediately
behind. The call number can now be edited if necessary (e.g. to change a direct dial
number). For this purpose, delete the last numbers by selecting the symbol
and then
enter new numbers.
5. To establish the connection, if necessary mark the symbol
and press the
OK
button
and select the symbol to store the call number.
1
The list of outgoing call numbers can be called up directly from the start screen by
pressing the
8
cursor button.
Call register
Missed calls
Incoming calls
Outgoing calls
MG3000_mono_en.book Seite 16 Donnerstag, 15. August 2002 8:24 08
