© Continental Automotive GmbH
33
Error code - Overview
➥
To be continued on the next page
Displayed message
Code
Meaning / measure
(Time is flashing)
O K I
or
= • The MTCO 1324 has automatically changed
over to the beginning or the end of the daylight
saving time,
• or the time has been adjusted with the chart
inserted.
Note: Update the chart carrier settings,
➥
see page 34
.
O L J
= Error during chart carrier settings update
Update the chart carrier settings once again,
➥
see page 34
.
(Colon is not flashing)
O L J
= Error in the driving mechanism of the chart carrier
Check whether the charts have been correctly
inserted.
W K
= Trip without driver 1 chart
(Error code cannot be found in the error memory.)
Insert driver 1 chart.
O K ¬
O K H
=
=
Driver 1 chart is missing
Driver 2 chart is missing
(This message will appear when switching from "
"
to "
", for example, while the chart is missing.)
Insert chart(s).
O W
O X
= Error during CAN transmission
W Y
= Internal error
O \
= Keypad error, key pressed too long or blocked
O ¬
= LCD error (display)
O L
= Error at the drawer
Start the ejection procedure and close the
drawer again afterwards.
Service only
