■
Switching on / off
The navigation system is switched on / off together with the ignition.
☞
Switch on the ignition.
:
As soon as the navigation system is operable, an advice on the use of the
system appears on the display.
☞
Read and confirm this advice by pressing
OK
on the remote control.
:
The “
Main control
” menu appears.
After a few seconds the system is initialized and you can select the navigation
functions (options in highlighted letters).
■
Stand-by mode
If you do not wish to hear guidance advice, you can set the navigation system
to its stand-by mode.
☞
Select “
Stand-by
” from the main control menu.
:
The display is switched off and audible guidance advice is muted.
☞
Press one of the cursor keys
4
,
6, 8
,
2
or the
OK
key on the remote
control to resume normal operation.
If the navigation system was switched off in stand-by mode, it restarts in stand-
by mode when turning the ignition on again.
■
Volume
You can adjust the volume of the audible guidance advice as follows:
☞
Push the
+
key once or more than once to increase the volume of the
voice messages.
☞
Push the
-
key once or more than once to decrease the volume of the
voice messages.
:
The adjusted volume is announced.
CONTROLS
12
0
5
25
75
95
100
0
5
25
75
95
100
0
5
25
75
95
100
0
5
25
75
95
100
D:\LOB-AM\22sy330.00\3112_316_0856_1_layout2.vp
Donnerstag, 9. September 1999 10:44:19
Farbprofil: Deaktiviert
Komposit Standardbildschirm