15
DVD changer
(accessory)
If, instead of a CD changer, a DVD changer is connected to the RM 8204, selecting
DVDC in the main menu effects a switchover to playback via this device.
The DVD changer’s basic functions (start, stop, search etc.) can be controlled via the
RC 5400 or the MM 5600 as described in the section on the CD changer.
✎
If the hand brake has been applied, the DVD changer’s video signal is output auto-
matically on the screen. While the vehicle is moving, the video signal remains disab-
led for safety reasons, although the audio signal remains effective.
✎
To permit full use of the DVD changer’s functionality, this device should be opera-
ted via its own remote control (for this purpose, an external infrared receiver must
be connected to the DVD changer).
✎
The DVD changer needs to be activated in the SETUP menu (refer to configuration
of the CD / DVD changer).
AUX input (audio / video source)
☞
Select “AUX” in the main menu in order to set the AUX input as the source.
:
If a video source has been connected to the RM 8204, its video and audio signals
will be output.
✎
For safety reasons, the video signal is only output if the hand brake has been
applied.
✎
To make the AUX input available, the AUX option must have been activated in the
SETUP menu.
✎
If a DVD changer has been connected, the AUX input receives purely audio signals.
SOUND menu
☞
Select “SND” in the main menu in order to open the sound sub-menu.
☞
Select bass, treble, balance, fader or loudness.
☞
Press
OK
to confirm your selection.
☞
Adjust the sound as required with the cursor buttons
8
and
2
.
☞
Press
OK
to confirm your settings.
☞
To exit the menu, select “ESC” or press the
ESC
button.
■
Adjustment ranges:
❑
Bass, treble: -9 to +9
❑
Balance: LEFT +9 ... MIDDLE ... RIGHT +9
❑
Fader: FRONT +9 ... MIDDLE ... REAR +9
❑
Loudness: ON ... OFF
Operation
