7
Activating the radio display and selecting a source
When the navigation system is on:
■
Via the RC 5400:
☞
Press
ENTERTAIN
.
:
The main menu of the RM 8204 will appear.
☞
Using the cursor buttons, select the required source (TUNER, CDC/DVDC or AUX)
and confirm it with
OK
.
✎
The remote control can also be used to call up the navigation module or a tele-
phone connected to this module.
✎
If no further button is pressed in the next 5 seconds, the unit switches automatically
to the previous video source (for instance, navigation window). This automatic swit-
chover can be deactivated via the timer activation / deactivation function.
■
Via the keypad of the MM 5600:
☞
Press the
O
button.
:
The main menu of the RM 8204 will appear.
☞
Pressing the
O
button again selects the next source in each case. Explicit confirma-
tion is not required here.
✎
If no further button is pressed in the next 5 seconds, the unit switches automatically
to the previous video source (for instance, navigation window). This automatic swit-
chover can be deactivated via the timer activation / deactivation function.
■
‘Busy’ display
While the system is busy, the cursor is displayed in grey. Only once the cursor has
regained its normal colour is the user interface enabled again.
Volume adjustment
☞
Press the
W
or
V
button to set the volume.
✎
If the button is held down, the volume changes continuously.
A
When setting the volume, please make sure that traffic noises (horns, sirens, emer-
gency vehicles, etc.) are still audible.
MUTE function
☞
Press the
LS
button.
:
This mutes the radio.
☞
Press the
LS
button again to deactivate the muting function.
✎
The muting function can also be deactivated by adjusting the volume with the
W
or
V
button.
✎
If the muting function is activated during CD playback, the CD changer stops at the
current CD location.
Video / audio signals during driving*
For reasons of driving safety, video images following selection of the AUX or DVDC
source are only displayed when the hand brake is applied.
* Prerequisite: The RM 8204 must be connected to a video source or DVD changer, and
the input for the AUX or DVD changer signals must have been enabled in the SETUP
menu.
Operation
