36
INSTALLATION
Electrical installation
Setting the instrument for wind speed indication
The VDO Ocean Line WIND is fitted with an LCD, which can display
wind speed in m/s, km/h, bft (Beaufort) or kts (Knots). The black angle in
one of the four corners of the display shows the instrument which has
been selected. The setting can be adjusted as follows:
On power up, the instrument shows the text UNIt for 5 seconds.
Switch off the power supply before this time elapses and switch it on
again.
The black needle on the instrument now points to the other units for the
wind speed in turn, in a clockwise direction. When it reaches the desired
unit, switch the power supply off again.
The unit will be saved in a non-volatile memory and remains saved even
after shutdown.
The unit can be adjusted again at any time as described above.
2. When UNIt appears,
switch off the power supply
immediately and then switch
it on again.
1. Switch on the power
supply.
3. Switch the power supply
on again, as soon as the
needle indicates the desired
instrument.
olwind_e.qxd 21.06.99 13:35 Seite 36
Summary of Contents for WIND
Page 2: ...Installation and Operating Instructions Page 22 40 21...
Page 3: ...22...
