1
2
3
4
INSTALLATION
INSTALLATION WITH BASE PLATE (OPTIONAL)
Take the floor plate and bend the brackets as needed. Dig a suitably sized hole in
the ground.
Insert the electrical conduit into the cable conduit hole of the
floor plate.
Level and cement the floor plate.
Nuts
Brackets
Cable conduit
hole
Base plate
Place the barrier on the floor
plate and fasten it with the
self-locking M12 nuts supplied.
Fixing holes
INSTALLATION WITHOUT
BASE PLATE
Place the barrier and block it
through the four holes present
internally on the basis.
SHAFT SUPPORT
Insert the bar support on the
shaft and fasten it with
screws
Insert the bar in the support
and tighten the screws
Screw
Shaft
Screw
Key
Bar
support
