![background image](http://html1.mh-extra.com/html/vdwall/ledsync820h/ledsync820h_user-manual_858341034.webp)
LVP615U
使用说明
34
2.1custom DVI EDID
--------------------------------------
2.1.1 Cus.
width
1920
2.1.2 Cus.
height
1002
2.1.3 Cus.
V Freq.
60
2.1.4 Apply
OK to apply
6.2.2 Hot spare setting
LVP615U
supports hot spare of input signals. When the current
input signal is lost. LVP615U will switch to the spare signal
automatically to avoid image interruption caused by the fault of signal
source.
2.Input video signal
--------------------------------------
2.1 DVI EDID
1280x1024_60
2.2 V1/V2 backup
off
2.3 VGA1/VGA2 backup
off
2.4 HDMI/DVI backup
off
2.5 V2 or YPbPr
V2
2.6 switch mode
one key switch
As shown in the above table
,
if ”2.2 V1/V2 backup
on
”,
if V1
signal is lost, processor will switch to V2 automatically.
6.2.3 V2 or YPbPr selection
V2 and YPbPr of LVP615U share the same port and button. Need
configure. Default input is V2. If need YPbPr input, then need set this
Summary of Contents for ledsync820h
