![background image](http://html2.mh-extra.com/html/vdwall/lvp605/lvp605_user-manual_3711364011.webp)
LVP605 User’s Manual
---------------------------------------------------------------------------------------------------
LED VIDEO PROCESSOR
11
Press this button to switch between Part / Full display mode.
This function is only available when the current input signal is
PC (
VGA 1
/
VGA 2
/
DVI
/
HDMI
) signal, while other signals can only
be displayed in the Full display mode.
Mode Description
Full
Full screen display. Entire picture is compressed to
display in LED screen, the moment the indicator above
the button is OFF.
Part
Part screen display. The picture will not be compressed,
but partly exported to entire LED screen, the moment the
indicator above the button is ON.
Caution:
when the width and height of current input signals are
less than the width or height of LED display (say the out_Hori_width
or out_Vert_height), Part mode will not work.
7) Freeze
Press this button, the indicator of this button will illuminate
normally, and the current picture will be frozen; press this button
again or perform other signal switching operations, the indicator of
this button will turn out, the picture will get in motion again.
8) Mosaic
Press this button only when current signals are DVI, the indicator
of this button will illuminate, LVP605 will enter Mosaic mode. Press
this button again, the indicator of this button will turn out, and LVP605
will exit Mosaic mode.
Notes:
LVP605 will be unable to enter Mosaic mode in the
following events:
1. The input signals are other signals than DVI;
2. BYPASS function has been switched on;
3. The definition of DVI input signals is different from the preset
output definition of the processor.
9) Text
LVP605 can add Text, company logo or animation onto current
picture, while current picture is normally displayed, press Text
button to go to caption adding mode, then select the signal source