LVP605 User’s Manual
http://www.cnledsourcing.com
---------------------------------------------------------------------------------------------------
LED VIDEO PROCESSOR
15
LVP605
outputs images from VGA and two DVI output ports. There
are 10 output formats as listed in the table below. User can enter the No.2
setting item “
Out Format”
to select one of them.
Format
1
1024×768_60
2
1024×768_75
3
1280×1024_60
4
1280×1024_75
5
1600×1200_60
6
1920×1080_50
7
1920×1080_60
8
1366×768_60
9
1440×900_60
10
2048×1152_60
Item 2: “
Out Format
”
In this item, turn the knob to select either of them, then press the
knob to save it and make it valid.
For example, if you select “
1280×1024_60
”, it means that the
output definition of LVP605 has been set as 1280×1024, and vertical
refresh rate is 60Hz.
Please select the output definition equal to or greater than the
actual definition of LED screen.
Items 3~6
：
“
Output image setup
”
The actual definition of LED can be any value, so we should set
LVP605 to make it output an image with the same definitions as that of
the LED, so that the LED could display a full image. See figure below:
