LVP605 User’s Manual
http://www.cnledsourcing.com
---------------------------------------------------------------------------------------------------
LED VIDEO PROCESSOR
22
(III) Mosaic setup
The maximum output definition of
LVP605
is 2048×1152 or
1600×1200, to drive so high definition, LED display requires two
transmission cards in cascade, so LVP605 provides two locations to
hold two built-in transmission cards; if the actual definition of LED
display exceeds the maximum output definition of LVP605, you may
divide the whole LED into pieces of smaller LED screen, then put them
together in Mosaic manner by connecting multiple sets of LVP605 in
parallel, so as to integrate the smaller pieces of LED into a large LED
display.
With frame synchronization technology, LVP605 solves the
problems of misplacement and delay of output image existing in
ultra-large LED mosaic, able to provide real-time, clear and fluent
displaying effects.
LVP605
supports multi-machine mosaic in parallel, in this way,
smaller pieces of LEDs can be integrated into a large display. For
example, if the output definition of LVP605 is set as 1920×1080, and
we put 2 sets of LVP605 together horizontally in parallel, it will be able
to connect any LED display of up to 3840×1080 pixels.
Below is a 2×2 mosaic example using 4 sets of LVP605, telling us
how to use multi-machine cascade of LVP605 and what we should pay
attention to.
The definition of each LED is 3456×1920, we can divide it into the
Category
Items
Input image setup
1
Out_Hori_Width
2
Out_ Hori _Start
3
Out_ Vert_Height
4
Out_Vert_Start
5
In_Hori_Width
6
In_ Hori _Start
7
In_ Vert_Height
8
In_Vert_Start
9
Mosaic Mode
