14.7.
After configuring total and unit parameters, press Brt+ or Brt- button to select
2.8 Auto Calculation, press OK to apply it;
14.8.
After last step some output ports we need to configure the 2.11 In H_Start or
2.12 In V_Start parameters, for example out2 3 4, set the parameters is to let
LVP909 the output port to crop the input video source from where;
14.9.
After configuring Out1 press Out2 button to select Out2 then configure it, press
Out 3 or Out4 button can select them then configure them;
15. Setting output width and height (App 5 6)
15.1.
After LVP909 configuring App M5, then you can see the interface as below;
2. Output Image (Out1) AppM2 M1
--------------------------------------------------------------------
2.9 In Width
1920 1920
2.10 In Height 1200
1200
2.11 In H_Start 0
0
2.12 In V_Start 0
0
2.13 Out Width 1920
1920
2.14 Out Height 1200
1200
2.15 Out H_Start 0
0
2.16 Out V_Start 0
0
Image_1 Source: VGA
Image_1 Status: 136 x 768_60
Image_2 Source: VGA
Image_2 Status: 136 x 768_60
Image_3 Source: VGA
Image_3 Status: 136 x 768_60
Image_4 Source: VGA
Image_4 Status: 136 x 768_60
--------------------------------------------------------------------
App. Mode: AppM5 Image2-1-4-3 0 s
