41
©Vecow ECX-3000 User Manual
GETTING TO KNOW YOUR ECX-3000
2.2.11 Ethernet Port
There are two 8-pin RJ-45 jacks supporting 10/100/1000/2500 Mbps Ethernet
connections on the front side of ECX-3000. LAN 1 is powered by Intel
®
I219LM Ethernet
engine, and LAN 2 is powered by Intel I225 Ethernet engine. When LAN 1 works in
normal status, iAMT 11.0 function is enabled.
Using suitable RJ-45 cable, you can connect the system to a computer, or to any other
devices with Ethernet connection, for example, a hub or a switch. Moreover, both of
LAN 1 and LAN 2 supports Wake on LAN and Pre-boot functions. The pin-outs of LAN
1 and LAN 2 are listed as follows:
DP
DP
HDMI
DVI-I
COM 3
COM 4
LAN 2
SIM 1
SIM 2
RTC
WLAN
1
2
3
RST
2.5G
LAN 1
LAN Chip
Function
Connector
I219_LAN1
RJ-45(10/100/1000)
LAN1
I225_LAN2
RJ-45(10/100/1000/2500)
LAN2
Pin Number
10/100 Mbps
1000/2500Mbps
1
E_TX+
MDI0_P
2
E_TX-
MDI0_N
3
E_RX+
MDI1_P
4
----
MDI2_P
5
-----
MDI2_N
6
E_RX-
MDI1_N
7
-----
MDI3_P
8
------
MDI3_N
Summary of Contents for ECX-3000
