40
BIOS and Driver
41
BIOS and Driver
©Vecow ABP-2000 Series Advanced Box PC User Manual
BIOS and Driver
4.1 BIOS Settings
The board uses UEFI BIOS that is use Serial Peripheral
Interface (SPI) Flash. The SPI Flash contains the BIOS
Setup program, POST, the PCI auto-configuration utility,
LAN, EEPROM information, and Serial port support. The
BIOS setup program is accessed by pressing the
<Del>
key after the Power-On Self-Test (POST) memory test
begins and before the operating system boot begins. The
menu bar is shown below.
Figure 4.1: BIOS Menu Bar
4
4.1.1 Main Menu
4.2.1 ACPI Setting
4.2 Advanced Function
System Time / Date :
Press “TAB” key to switch sub-
items of value .Then press “ +” key or “-“ key number
key for modify value.
In this page , you could make sure you CPU type and
DRAM type that you are install into this system.
Figure 4.1.1: BIOS Main screen
Figure 4.2.1: ACPI Setting setup screen
