49
©Vecow ECX-1400/1300 User Manual
GETTING TO KNOW YOUR ECX-1400/1300
2.3.5 PoE Ports
ECX-1400 series :
There are 4 RJ45 connectors in the rear side of ECX-1400. It supports IEEE 802.3at
(PoE
+
) Power over Ethernet (PoE) connection delivering up to 37W/54V per port and
1000BASE-T gigabit data signals over standard Ethernet Cat 5/Cat 6 cable.
Each PoE connection is powered by Intel
®
I350 Gigabit Ethernet controller and
independent PCI express interface to connect with multi-core processor for
network and data transmit optimization. Only when PoE port starts to supply
power to power devices, the dedicated LED will be lightened.
PS. Suggest to use PoE function when power input is over 12V.
The pin-outs of LAN 3 and LAN 6 are listed as follows :
Pin No.
10/100 Mbps
1000Mbps
PoE
1
E_TX+
MDI0_P
PoE+
2
E_TX-
MDI0_N
PoE+
3
E_RX+
MDI1_P
PoE-
4
----
MDI2_P
----
5
-----
MDI2_N
----
6
E_RX-
MDI1_N
PoE-
7
-----
MDI3_P
----
8
------
MDI3_N
----
On | Off
IGN
COM 4
COM 3
COM 2
COM 1
LAN6
PoE
LAN5
PoE
LAN4
PoE
LAN3
PoE
Isolated
DIO 2
D I
PIN 1 ~ 8
DO
PIN 11 ~ 18
20
11
10
1
Isolated
DIO 1
D I
PIN 1 ~ 8
DO
PIN 11 ~ 18
20
11
10
1
DC-IN 6-36V
ANT 2
ANT 1
1
8
Each LAN port is supported by standard RJ-45 connector with LED indicators to
present Active/Link/Speed status of the connection.
The LED indicator on the right bottom corner lightens in solid green when the
cable is properly connected to a 100Mbps Ethernet network; The LED indicator
on the right bottom corner lightens in solid orange when the cable is properly
connected to a 1000Mbps Ethernet network; The left LED will keep twinkling/off
when Ethernet data packets are being transmitted/received.
