107
©Vecow ECX-2200A/2100A User Manual
BIOS SETUP
4.3.3 Power & Performance
Figure 4-3-3 : Power & Performance
Boot performance mode
Select the performance state that the BIOS will set starting from reset vector.
Intel(R) SpeedStep(tm)
Allows more than two frequency ranges to be supported.
Intel(R) Speed Shift Technology
Enable/Disable Intel(R) Speed Shift Technology support. Enabling will expose
the CPPC v2 interface to allow for hardware controlled P-states.
Turbo Mode
Enable/Disable processor Turbo Mode (requires Intel Speed Step or Intel Speed
Shift to be available and enabled).
C states
Enable/Disable CPU Power Management. Allows CPU to go to C states when
it's not 100% utilized.
Enhanced C-states
Enable/Disable C1E. When enabled, CPU will switch to minimum speed when
all cores enter C-State.
Dual Tau Boost
Enable Dual Tau Boost feature. This is only applicable for CMLS
35W/65W/125W sku. When DPTF is enabled this feature is ignored.
4.3.3.1 CPU – Power Management Control
Figure 4-3-3-1 : CPU - Power Management Control