24
©Vecow SEC-2000 User Manual
GETTING TO KNOW YOUR SEC-2000
Each LAN port is supported by standard RJ-45 connector with LED indicators to
present Active/Link/Speed status of the connection.
The LED indicator on the right bottom corner lightens in solid green when the
cable is properly connected to a 100Mbps Ethernet network; The LED indicator
on the right bottom corner lightens in solid orange when the cable is properly
connected to a 1000Mbps Ethernet network; The left LED will keep twinkling/off
when Ethernet data packets are being transmitted/received.
LED Location LED Color
10Mbps
100Mbps 1000Mbps
Right
Green/
Orange
Off
Solid
Green
Solid
Orange
Left
Yellow
Twinkling
Yellow
Twinkling
Yellow
Twinkling
Yellow
1
8
2.3.12 CN5 : LAN
There are 2 8-pin RJ-45 jacks supporting 10/100/1000 Mbps Ethernet
connections. LAN 1 (Right side)/LAN 2 (Left side) are powered by Intel
®
I210
Ethernet engine. When both LAN 1 and LAN 2 work in normal status, basic
iAMT function is enabled.
Using suitable RJ-45 cable, you can connect SEC-2000 system to a computer,
or to any other devices with Ethernet connection, for example, a hub or a
switch. Moreover, both of LAN 1 and LAN 2 supports Wake on LAN and Pre-
boot functions. The pinouts of LAN 1 and LAN 2 are listed as follows :
Pin No.
10/100 Mbps
1000Mbps
1
E_TX+
MDI0_P
2
E_TX-
MDI0_N
3
E_RX+
MDI1_P
4
----
MDI2_P
5
-----
MDI2_N
6
E_RX-
MDI1_N
7
-----
MDI3_P
8
------
MDI3_N
CN5
