74
©Vecow SPC-5000 User Manual
BIOS SETUP
4.4.2.2 SATA And RST Configuration
SATA Controller(s)
Enable or disable SATA Device.
SATA Mode Selection
Determines how SATA controllers operate.
Software Feature Mask Configuration
RST Legacy OPROM/RST UEFI driver will refer to the SWFW configuration to
enable/disable the storage features.
Aggressive LPM Support
Enable PCH to aggressively enter link power state.
Options for each SATA port.
Port n
Enable or disable SATA port.
Hot Plug
Designates this port as Hot Pluggable.
Spin Up Device
On an edge detect from 0 to 1, the PCH starts a COMRESET initialization
sequence to the device.
SATA Device Type
Identify the SATA port is connected to Solid State Drive or Hard Disk Drive.
Figure 4-4-2-2 : SATA Devices Settings