Page 5
9
7
6
5
4
CLEANING
AND
MAINTENANCE
1. Before carrying out any maintenance or cleaning operations the mains electrical supply MUST be
disconnected.
2. CLEANING AND MAINTENANCE SHOULD BE CARRIED OUT BY A
QUALIFIED PERSON
3. Before attempting to remove the motor impeller assembly disconnect the cable by removing the
terminal block inside the control box.
4. Loosen the screws (Fig.8) without taking them off.
5. Rotate slightly and remove the motor-impeller assembly (Fig. 8).
6. Clean the motor-impeller assembly either with a dry brush or a dry cloth.
7. Electrical parts
cannot
be cleaned.
8. Reassemble in the reverse order to above (Fig 9).
8
