22
Ein15
--, Origin BTN, Stop BTN, Start BTN, Foot BTN, safe flag-1, safe flag-2,
Shortcut 266, Lack fault, Block fault, Temp fault, Temp\Feed fault, Upper CS,
Nether CS, pressure flag
Ein16
--, Origin BTN, Stop BTN, Start BTN, Foot BTN, safe flag-1, safe flag-2,
Shortcut 267, Lack fault, Block fault, Temp fault, Temp\Feed fault, Upper CS,
Nether CS, pressure flag
Kin1
--
、
Upper CS, Nether CS
Kin2
--
、
Upper CS, Nether CS
Kin3
--
、
Upper CS, Nether CS
Kin4
--
、
Upper CS, Nether CS
2. In the “Output Config 2” display window, the output interface can be set:
Port
Optional Function
Mout1~Mout4
--, Nozzle 1, Nozzle 2, Nozzle 3, Nozzle 4, Working Flag, Work End Flag,
Cylinder, Clean Output
Eout09~Eout16
--, Ready Flag, Alarm Flag, Working Flag, Work End Flag, Cylinder, Clean
Output, pause flag, left light flag, right light flag
3. In the teaching pendant, “Eout09~Eout16” are corresponding to the “Eout8+
(0~8)” at the “IO Test” and “Output (point)” displaying window.
Namely, “Eout8+ 1” is the output interface “Eou09”. “Eout8+ 2” is the output
interface “Eou10”. “Eout8+ 3” is the output interface “Eou11”, etc.
4.5.2 IO Function Instruction
Input signal function
Function Instruction
--
N/A.