Maintenance of the soldering iron tip
Then wipe the tip of the soldering iron with a clean sponge. Such as
Repeat cleaning until the oxygen is completely removed
And then plating a new tin layer.
● Check and clean the soldering iron tip
4 , If the soldering iron tip is deformed or re-etched, it must
It must be replaced with a new one.
△
Note: Do not use a file to remove the soldering iron tip
On the oxide.
!
1, Set temperature to Celsius 250 degree.
2, After the temperature stabilizes, clean it with a cleaning sponge
Soldering iron tip and check the condition of the soldering iron.
3. If the tinned part of the soldering iron tip contains black
In the case of color oxide, a new tin layer can be plated,
Summary of Contents for SD-150
Page 28: ......