In order to avoid damage to the soldering iron and to maintain a safe working environment, the following items should be
observed:
This product uses rated voltage and frequency. (Please refer to the logo on the back of the machine)
It is strictly prohibited to use this product when it is damaged, especially when the power cord is damaged.
This product uses a three-wire grounding plug, which must be inserted into a three-hole grounding socket. Do not
change the plug or
Use an ungrounded three-head adapter to cause poor grounding. If you need to extend the wire,
please use a grounded three
Power cord.
Do not use the soldering iron tip for work other than soldering.
Do not knock the soldering iron on the workbench to remove the flux residue, which may severely shake the soldering
iron.
Do not modify the welding station without authorization.
When replacing parts, use the original factory originals.
Do not get the soldering station wet. Do not use or disassemble the soldering station when your hands are wet, nor pull
the power cord.
Smoke will be emitted during welding, and the workplace should have good ventilation facilities.
When using the soldering station, do not make any rash actions that may harm your body or damage objects.
Children do not know the danger of electrical products, so this product should be inaccessible to children or have adult
supervision
Use and store in the appropriate place.
●
●
●
●
●
●
●
●
●
●
●
Part Name
Assemble the wires
Soldering iron socket
Cleaning sponge
Soldering iron stand base
Summary of Contents for SD-150
Page 28: ......
