Otherwise, the unit should be started and operated without assistance. For specific starting
instructions, see the appropriate section of your owner ‘s manual.
The BM100 produces poisonous exhaust fumes as soon as the combustible engine starts
running. These gases (e.g. carbon monoxide) may be colorless and odorless. To reduce the
risk of serious or fatal injury from breathing toxic fumes, never run the BM100 indoors or in
poorly ventilated locations. Ensure proper ventilation when working in trenches or other
confined areas. Keep the space behind the engine clear at all times to allow for the escape of
hot and toxic exhaust fumes. Operate your machine under good visibility and daylight
conditions only. Work carefully.
When working with the BM100, always wear it on your back using the carrying harness. Wrap
your fingers tightly around the handle, keeping the control handle cradled between your
thumb and forefinger. Keep your hand in this position to have your machine under control at all
times.
When you pull the starter grip, don’t wrap the starter rope around your hand. Do not allow the
grip to snap back, guide the starter rope slowly back to permit the rope to rewind properly.
Failure to follow this procedure may result in injury to your hand or fingers and may damage
the starter mechanism.
CLEANING THE MACHINE
Always empty and clean the liquid container after each use. Residual chemicals may have
undesirable effects during subsequent spraying with a different type of chemical (e.g., residual
herbicide may damage or kill plants being sprayed with a pesticide). It is best to fill the
container with clean water and let it drain out with the tap open. Be cautious where you drain
the liquid during the cleaning process. Never store liquid in the container for more than one
day.
FREQUENTLY ASKED QUESTIONS
1. Is this product only used for liquid solutions?
Yes, this product can only be used with liquid solutions.
2. What type of motor does this product have?
Our BM100 uses a 2-cycle petrol engine.
3. What is the flow rate?
The flow rate is180 Iph.
4. What is the droplet size this product will produce?
This product will produce a droplet size under 60 microns.
12