Vector Technology Co. – GSM IC-CARD Payphone Manual
GSM IC-Card PAYPHONE
- 14 -
Function 14:
The credit of indication of rate Program
This function is to program the credit of the
indication of rate.
If you choose the tariff by payphone ( In function 10 you choose tariff by payphone itself),
you need to program the credit of the indication of rate.
There are 47 sets indication of rate for programming. But the Rate”46” and Rate “47” is fix.
Rate”46”
Free call
Rate “47”
Barred call
Example:
In the function 02, we program the prefix number 00886 will follow the Rate”07”. Now, we
program the credit of the Rate “07” in function 14. The credit is 1 dollar for 60 seconds. We
program 1 dollar in function 14.
LCD Display
Operation
1.
COMMAND(00-31)
14
2.
TAXE(1)
press 1 and REDAIL key( This is for system tariff ,
please read below)
3.
TAXE(2)
press 1 and REDAIL key ( This is for system tariff ,
please read below)
4.
RATE(00-47):
07 and REDAIL key (Program the Rate”07”
5.
MIN.1
ST
1 ( 1 dollar for the minimum credit the user should
insert to make a call)
6.
MIN 2 ND:
2 ( When the MIN.1 ST credit run out, User should
insert 2 dollar to keep this call continue.)
7.
RATE(00-47):
You can continue to program other
indication of rate.
Note. 1) In function 10, you choose :
. (4) REVERSE
＋
_SELF (5) 50Hz_
＋
_SELF
(6) 16KHz_
＋
_SELF
(7) 12KHz_
＋
_SELF
(8) AUTODECT
It will tariff by payphone.
2) The TAXE(1) , TAXE(2) , is for the system Tariff. Please program the minimum credit in
TAXE(1) , TAXE(2), when you choose the tariff by payphone itself.
If you choose the tariff by system ( In function 10 you choose tariff by system), you need to
program the credit of TAXE(1) and TAXE(2).
