Vector Technology Co. – GSM IC-CARD Payphone Manual
GSM IC-Card PAYPHONE
- 22 -
Step 4: Define the time groups:
Because the discount time is from 23:00~ 06:00, and Sunday all day long, we define the time
group in function 20.
PERIOD 00 0230162300235901 (Monday to Saturday 23:00~23:59)
PERIOD 01 0230160000060001 (Monday to Saturday 00:00~06:00)
PERIOD 02
0230000000235901 (Sunday all day long)
Q&A
Q1.The LCD displays that the diagnostic test are not completed. It stops at
GSM - GSM Power On --
Step 3 -- Step 4 -- repeatedly
A: --Step 3—Step 4 means the phone can’t read the SIM card data.
Ensure that the SIM card is secured in the holder and it makes proper contact. Ensure that the
GSM phone cable is secure and that is makes proper contact at both ends.
Q2. If no “GSM Power On” message on the LCD when payphone boots?
A: It means phone can’t read GSM module. Ensure GSM Module work fine. Ensure a micro
switch near GSM module switched to GSM side( left side). If switch to PC side, it’s for PC
programming.
Q3. Signal Quality shows 00 or 99
A: Ensure the internal antenna cable and external antenna are plugged in well.
Q4. The LCD display shows “Service”?
A: It means the SIM card was locked. Payphone recognized the SIM card you insert now is not the
original one.
Please enter F30→ 11969→255 (enable F07) then go F07 press 0(disable SIM card lock)
→SAVING
Q5. The LCD display gets stuck on “Please Wait”
A: Ensure the function 10 on the programming must be set to (0) Autodetection.
