Vector AirPro VEC256, Owner'S Manual

33

3

and operate the compressor from an external 12 volt DC source.

4. To avoid over-inflation, carefully follow instructions on articles to be inflated.

5.  Never leave compressor unattended while in use. Allow unit to cool for  

five minutes after 10 minutes of continuous operation.

6.  Do  not  use  accessories  that  are  not  designed  to  be  used  with  the  

  compressor.

7. Do not place battery pack on heater and keep it out of sunlight.

8. Do not charge battery when it is at or above 122° F (50° C). Allow the  

battery pack to cool before charging.

CONTENTS

1.   INTRODUCTION .................................................... 4

  2.   ADDITIONAL KEY FEATURES ................................... 5

  3.   ATTACHING THE AIR HOSE .................................... 5

  4.   POWERING THE COMPRESSOR ............................. 6

  4.1 Powering from the battery pack .........................

       4.2 DC Power Adapter Use ................................... 6

  5.   CHARGING/RECHARGING THE BATTERY PACK ...... 7

  5.1 AC Recharge of battery pack .......................... 7

  6.   COMPRESSOR/TIRE INFLATOR ............................... 8

  6.1 Tire inflation or products with a valve stem ....... 8

  6.2 Inflate other articles (without valve stem) ....... 8, 9

  7.   TYPICAL INFLATION TIRES ...................................... 9

  8.   MAINTENANCE/REPLACEMENT PARTS .................. 9

  9.   BATTERY REMOVAL/REPLACEMENT ...................... 10

  10. BATTERY DISPOSAL .............................................. 10

  11. SPECIFICATIONS .................................................. 10
   

WARRANTY ......................................................... 11