22
NOTES ON SAFETY AND INSTALLATION
POS TOuch 14 Wide
6. Start-up
i
Your Vectron specialist retailer has programmed the POS Touch 14 Wide
for you. If necessary, he will be glad to support you during initial
start-up and will train you in using your POS system.
6.1. Setting up the POS Touch 14 Wide
6.1.1. Selecting the set-up site for the POS Touch 14 Wide
X
Set up the POS Touch 14 Wide in a well ventilated room with a temperature of
between 0 and 40°C.
X
The POS Touch 14 Wide must not be covered during operation.
X
Select the setup site so that the POS Touch 14 Wide is not exposed to direct
sunlight.
X
Place the POS Touch 14 Wide on a stable, even surface with sufficient space.
X
Make sure that no liquids can flow over the POS Touch 14 Wide, the power
supply unit or the mains cable.
X
Route the cables so that they are not subjected to tension.
X
Route the cables in such a way that nobody can trip over them.
X
When mounting the POS Touch 14 Wide on a wall, ensure that the wall and the
suspension elements used have sufficient load-bearing capacity.
Summary of Contents for POS TOUCH 12 WIDE
Page 1: ...Notes on safety and installation POS Touch 14 Wide...
Page 2: ......
Page 3: ...YOUR VECTRON DEALER...
